Loading…

Free STC calculator for glass

How much sound does this glass block?

Build a single pane, a laminate or an insulating unit and get its estimated STC and OITC, with the sound curve behind them. Calculated by GlassRef from the layers you pick; an estimate, not a tested rating.

Start from
Outer pane (outdoors)
Inner pane (indoors)

Get sound, energy and light in one makeup

In GlassRef, the same estimate updates as you build with real products from every maker, next to the U-factor, SHGC and light, and prints on your spec sheet.

What changes the sound rating of glass

Sound passes through glass by making it vibrate. Every glass pane also has a frequency where it vibrates especially easily (the coincidence dip), and a sealed unit has a low-frequency resonance where both panes and the air between them move together. Good acoustic makeups add weight, keep the panes from working together, and damp the dip.

Weight

Heavier glass blocks more sound. Each doubling of the weight helps, but the gain flattens out, and weight adds cost and load on the frame.

Different thicknesses

Two panes of the same thickness share the same coincidence dip, so sound leaks through both at once. Making one pane thicker than the other spreads the dips apart.

A wider air space

A wider gap lowers the unit’s resonance and helps low-frequency noise. Narrow gaps in standard insulating units can do little more than the same glass in one piece.

Laminated glass and acoustic interlayers

An interlayer damps the vibration, filling in the coincidence dip. Acoustic PVB is made soft for exactly that; stiff structural interlayers such as SGP damp much less.

STC, OITC and the finished window

STC suits voices and office noise; OITC suits traffic and aircraft. Both here are for the center of the glass. A finished window adds its frame, seals and installation, so for a specification ask for the maker’s ASTM E90 test of the actual product.

Questions

What is STC?

Sound Transmission Class: one number, from ASTM E413, that summarizes how much a wall, window or glass makeup reduces sound across the speech range. Higher is quieter. It is worked out from the sound transmission loss measured (or here, calculated) at each frequency band.

What is OITC?

Outdoor-Indoor Transmission Class (ASTM E1332). It weighs low-frequency noise more, like traffic, trains and aircraft, so it suits facades and windows facing the street. For the same glass, OITC is usually lower than STC.

How accurate is this calculator?

It is an estimate. GlassRef calculates it from each layer’s mass and stiffness and the interlayer’s damping, for the center of the glass, and shows the likely range. Checked against published lab tests it stays within about ±3 STC for most makeups (±4 for those marked indicative). It is not a tested rating.

Why is the window’s STC lower than the glass?

A window’s rating includes the frame, seals, size and installation. Air leaks and a light frame can cost several points. For a specification, ask the window or glass maker for an ASTM E90 lab test of the actual product.

What makes glass quieter?

More glass weight, a wider air space, panes of different thicknesses, and laminated glass with an acoustic interlayer. Try each in the calculator above and watch the estimate change.

Does argon make windows quieter?

Not by much. Gas fill is chosen for insulation (U-factor); its effect on sound is small. Try air and argon in the calculator to see the difference for your makeup.

More free tools