Free NFRC label checker
Does my window meet ENERGY STAR and the energy code?
Type the numbers from the window’s NFRC label and pick where it goes. GlassRef compares them with ENERGY STAR Version 7.0 and the 2021 IECC and shows every limit with its source.
Scan the label with your iPhone instead
The free GlassRef app reads an NFRC label with the camera, checks it and saves it to a project. A GlassRef account also looks up the glass inside and compares makeups.
How to read an NFRC window label
Windows, doors and skylights rated by the National Fenestration Rating Council carry a temporary label with the product’s ratings, usually stuck on the glass. The numbers rate the whole product, frame included, under standard conditions, so you can compare one product with another. Here is what each number means.
U-factor
How fast heat flows through the whole window, in Btu/h·ft²·°F. Lower is better: it keeps heat in during winter. This is the number energy codes care about most.
Solar Heat Gain Coefficient (SHGC)
The share of the sun’s heat that gets through, from 0 to 1. Lower blocks more solar heat, which matters most in hot, sunny climates; in cold climates a higher SHGC can help heat the house in winter, which is why ENERGY STAR’s Northern zone sets a minimum.
Visible Transmittance (VT)
The share of visible light that gets through, from 0 to 1. Higher means more daylight. Codes don’t set a limit for it.
Air Leakage
How much air leaks through the window, in cubic feet per minute per square foot of window. Lower is better. ENERGY STAR asks for 0.3 or less on windows (0.5 on swinging doors). Not every label shows it.
Condensation Resistance
How well the window resists condensation on the inside, from 1 to 100. Higher is better. It is optional on the label and no code limit applies.
ENERGY STAR and the energy code are different tests
The energy code is the legal minimum where you build; GlassRef checks the 2021 International Energy Conservation Code (IECC), residential Table R402.1.2. States and cities adopt different editions and amend them, so your local code may differ. ENERGY STAR is a voluntary label with stricter limits; GlassRef checks Version 7.0 (effective October 23, 2023), whose four zones are not the same as the code’s climate zones.
Questions
Does my window meet ENERGY STAR?
Enter the U-factor and SHGC from the NFRC label above, pick the product and the ENERGY STAR zone, and GlassRef compares them with the ENERGY STAR Version 7.0 limits for that zone. ENERGY STAR’s own website has the zone map; enter your ZIP code there if you aren’t sure of the zone.
What climate zone am I in?
The energy code uses climate zones 0 to 8, set by county. The examples next to each zone are a guide; your local building department can confirm your zone and the code edition it enforces.
Is a lower U-factor always better?
For keeping heat in, yes. SHGC is the one that depends on climate: lower in hot places, and in cold places a moderate SHGC can let in useful winter sun.
Are these whole-window numbers?
Yes. NFRC label numbers rate the whole window: glass, frame and edges together. Glass-only (center-of-glass) numbers, like the ones on a glass maker’s data sheet, are usually better than the window’s and can’t be compared with these limits.
Does GlassRef certify windows?
No. The numbers are the label’s, as printed, and GlassRef only compares them with the published limits. Certification belongs to NFRC and its accredited labs, and your building department decides what the code requires.
Can I scan the label with my phone?
Yes, in the free GlassRef iPhone app: point the camera at the label and it reads the numbers, then you can share the result or save it to a project.
More free tools
GlassRef publishes reference data and shows where every number came from. It does not test, certify or approve products; product certification belongs to bodies such as NFRC and SGCC, and the design professional of record signs off on what goes into a building. GlassRef is independent and not affiliated with LBNL, NFRC, ENERGY STAR or any manufacturer.